Board and Batten Spacing for a 14 ft Wall, 9 ft Ceiling
This is a measured board and batten layout for a 14 ft (427 cm) wide wall with a 9 ft (274 cm) ceiling. The ledge sits at 5' 7.5", about five eighths of the wall height, which is the proportion that looks right on taller ceilings. A 14 ft wall is typical of a living room or a primary bedroom.
Cut list
| Piece | Qty | Length each |
|---|---|---|
| Vertical batten | 10 | 5' 0.5" (154 cm) |
| Top rail (ledge) | 1 | 14' (427 cm) |
Total: 64 linear ft (19.6 m). Order about 71 linear ft (+10% for offcuts). The 14 ft ledge usually comes in two pieces joined over a batten.
Why this layout works
Battens about 16" apart match stud spacing and give a crisp rhythm. On 14 ft, 10 battens land at 15.5", the closest even split.
Time and materials
This layout has 11 pieces. With pre-cut pieces expect about 1 h 33 min to install, plus paint drying time.
How to install
- Mark the ledge height with a laser level.
- Fix a batten tight into each corner, then mark the remaining centres at equal spacing.
- Fit the ledge first, joining long lengths over a batten, then the battens underneath.
- Caulk, fill and paint wall and battens one color.
Questions about this wall size
How many battens on a 14 ft wall?
10 battens, 3" wide, 15.5" (39 cm) apart, with the ledge at 5' 7.5" (171 cm).
How much trim do I need?
About 64 linear ft net; order roughly 71 linear ft.
Where do I join the 14 ft ledge?
Over a batten, so the joint is supported and hidden by the vertical line. Cut both ends square, glue, and fill the seam before painting.
Get it pre-cut
- Quick Install MDF Board and Batten Panels, from $592
- Square Grid Board and Batten Accent Wall Kit, from $252
- Shaker Board and Batten Grid Wainscoting Kit, from $70
Shop all board and batten kits · Plan your wall free
Related layouts: 14 ft wall, 8 ft ceiling · Picture frame molding, 14 ft · Wainscoting, 14 ft · Batten trim guide · All layouts by wall size