Shaker Board and Batten Grid Wainscoting Kit, 1 to 5 Sets

Shaker Board and Batten Grid Wainscoting Kit, 1 to 5 Sets, Self-Adhesive Easy Installation. The Shaker Board and Batten Grid lays out crisp vertical and horizontal battens in a squared pattern, the look behind many modern farmhouse accent walls. Sets cover 47.2 inches each, up to five sets for a 236 inch wall, and you choose a slim 4 cm or a wide 10 cm molding. The Self-Adhesive Paintable option speeds the job up considerably.

This self adhesive board and batten grid gives you the clean lines of shaker style wall paneling without cutting raw molding. The trim is lightweight hard polystyrene polymer, smooth, factory primed and ready to paint, and it does not absorb water. Choose the Self-Adhesive option to peel and press each piece onto the wall, or Non-Adhesive if you prefer to glue it on. Free shipping to the US, Canada, UK, Ireland and the EU, and free 14-day returns. Not sure how many sets your wall needs? Design your wall free before you order.

Material

• High-quality, durable hard polystyrene polymer
• Not wood and not foam
• Lightweight yet solid
• Moisture resistant
• Smooth, factory primed and ready to paint

Shaker Wainscoting, Board and Batten Kit, Traditional Wainscoting, Wall Paneling is designed for homeowners and DIY renovators who want a polished architectural wall feature with balanced proportions, paintable detail, and a custom-built appearance. The structured grid layout creates clean architectural rhythm for board and batten, shaker-inspired paneling, geometric feature walls, and contemporary interior schemes. Lightweight hard polystyrene polymer keeps the molding easy to handle, paintable, and moisture resistant, making it practical for decorative trim across many interior spaces. The design supports searches for wall molding, decorative wall paneling, feature-wall trim, architectural wall decor, and DIY interior upgrades without forcing unrelated keywords into the product. Accurate measurements help keep margins, gaps, and panel proportions balanced, especially when the layout must align with beds, consoles, dining furniture, or fixed architectural features. Careful spacing helps the finished molding feel integrated with the room. Designed to suit your wall furniture layout and room proportions with a.

If you have custom wall measurements, please send us a message.

PANEL DIMENSIONS
• Technical drawing: each grid panel set spans 120 cm (47.2 in); set widths extend to 240, 360, 480 or 600 cm (94.5, 141.7, 189.0 or 236.2 in). Molding width is 4 cm (1.6 in) or 10 cm (3.9 in).
• Available variations: 1–5 sets, totaling 120–600 cm (47.2–236.2 in), with 4 cm (1.6 in) or 10 cm (3.9 in) molding.
If you cannot find the wall size you need, we can make a custom product to fit your wall measurements. Please feel free to send us a message.

OPTIONS

Choose your panel set (1 to 5 sets, 120 to 600 cm / 47.2 to 236.2 in), your molding width (4 cm / 1.6 in or 10 cm / 3.9 in) and your installation type (Non-Adhesive or Self-Adhesive).

Mirrors and artwork are not included.

WHERE IT WORKS
This decorative wall molding suits living rooms, bedrooms, dining rooms, hallways, stairwells, home offices, nurseries and rented flats. Because the molding is hard polystyrene polymer rather than timber or MDF wall panels, it also holds up in bathrooms, cloakrooms and utility rooms where moisture would swell a wooden wall trim. Use it to build a full feature wall, half wall paneling below a chair rail, a headboard feature or a run of picture frame moulding along a corridor.

FREE CUSTOM ARCHITECTURAL DESIGN SUPPORT
We do not just post you a box of trim. Send us a photo of your wall and your measurements and our team draws a custom wall molding layout for your exact space, panel sizes, spacing, margins and the position of sockets, doors and radiators all worked out before anything is cut. You approve the drawing, then we cut the kit to that plan. There is no charge for this service and no obligation to order. If you are unsure which wall molding design suits your ceiling height or your furniture, just ask and we will send you two or three options to compare.

HOW TO INSTALL, STEP BY STEP

1. Measure your wall and mark the panel layout with a pencil, a tape measure and a spirit level. Use the printed layout supplied with your kit.
2. Wipe the wall down so it is clean, dry and free of dust.
3. Glue On option: run construction adhesive suitable for polystyrene polymer along the back of each piece.
4. Peel & Stick option: lift the liner and press the piece straight onto the wall, no adhesive, no drying time and no mess. This is the easiest route to DIY wall molding and the one most first timers choose.
5. Press each length into place and check it against your level before the adhesive grabs.
6. Fill the mitred joints and any small gaps with a flexible decorators filler, then sand lightly.
7. Prime if you wish and paint. The molding takes emulsion, eggshell or satin straight away.
No mitre saw, no cutting and no offcuts, every piece of wall trim arrives finished to size.

FREQUENTLY ASKED QUESTIONS
Q: What is the moulding on walls called?
A: Applied frames like these are called picture frame moulding, wall molding or wall trim. When they sit below a chair rail it is usually called wainscoting or half wall paneling.

Q: What is a molding frame?
A: A molding frame is a rectangle built from four lengths of trim fixed directly to the wall. It is not a box, the wall itself forms the panel, and the trim creates the shadow line around it.

Q: Which moulding is best for a wall?
A: Lightweight hard polystyrene polymer is the easiest to live with. It is far lighter than timber, will not warp, split or absorb moisture like MDF wall panels, and it takes paint without raising a grain.

Q: What are the different types of wall molding?
A: The common ones are picture frame moulding, board and batten, beadboard, slat walls and chair rail wainscoting. This kit is picture frame moulding, which is the most flexible because it can be scaled to any wall.

Q: How can I make a DIY moulding frame?
A: Traditionally you would measure, cut 45 degree mitres and hope the corners close. With a pre cut wall molding kit that step is already done, you mark the layout, fix the pieces and fill the joints.

Q: Does it come with adhesive?
A: The Glue On option does not include adhesive, so you supply a construction adhesive suitable for polystyrene polymer. The Peel & Stick option arrives with the backing tape already applied and needs nothing else.

Q: Is it easy to paint, and can it be used in a bathroom?
A: Yes to both. The surface is smooth and takes primer and paint in one coat. Because hard polystyrene polymer does not absorb water, it is safe in bathrooms, cloakrooms and utility rooms.

SHIPPING, DUTIES & RETURNS • Free worldwide shipping on every order • DDP delivery all taxes and import duties are already included in the price • No customs charges, no hidden fees and no surprise costs on delivery for the United States, Canada, the United Kingdom and the European Union • Tracked express courier (FedEx, UPS or DHL) on every parcel • 14 day free returns and exchanges • Message us any time before or after ordering, we answer quickly and we are happy to help you plan the wall