French Step Corner Picture Frame Wall Molding Kit, Pre-Cut MDF. Stepped inside corners give this Picture Frame French Step Corner Kit its formal, Parisian character. The panel design comes in 31.5 inch or 39.4 inch sizes, with a 1 inch or 1.6 inch molding. Each piece is Pre-Cut Paintable MDF, so the notched corners are already shaped and the frame only needs priming and a final coat.
Material
- Pre-cut MDF for a crisp architectural profile
- Smooth and paintable
- Designed for dry interior rooms
French Wall Moulding, Pre Cut MDF Trim, Traditional Wainscoting, Wall Molding Kit is designed for homeowners and DIY renovators who want a polished architectural wall feature with balanced proportions, paintable detail, and a custom-built appearance. Its picture-frame geometry creates clean shadow lines that give a flat wall a tailored architectural appearance without covering the entire surface. The MDF construction keeps panel proportions consistent and provides a smooth surface for primer and interior paint, helping decorative lines remain crisp after installation. Its combination of molding, panel spacing, paintable detail, and room-specific sizing makes it relevant to wall paneling, wall trim, feature-wall, and DIY molding projects. The layout can be planned around wall width, room height, furniture placement, and preferred spacing so the finished installation feels intentional rather than generic. Careful spacing helps the finished molding feel integrated with the room. Designed to suit your wall furniture layout and room proportions with.
If you have custom wall measurements, please send us a message.
PANEL DIMENSIONS
• Technical drawing: panel design options are 80 cm (31.5 in) or 100 cm (39.5 in), with 2.5 cm (1 in) or 4 cm (1.6 in) molding.
• Available variations: 80 cm (31.5 in) or 100 cm (39.5 in) panel design × 2.5 cm (1 in) or 4 cm (1.6 in) molding width.
If you cannot find the wall size you need, we can make a custom product to fit your wall measurements. Please feel free to send us a message.
OPTIONS
Choose your panel design (80 cm / 31.5 in or 100 cm / 39.4 in) and molding size (2.5 cm / 1 in or 4 cm / 1.6 in).
Mirrors and artwork are not included.
WHERE IT WORKS
This decorative wall molding suits living rooms, bedrooms, dining rooms, hallways, stairwells, home offices, nurseries and rented flats. This pre-cut MDF molding is designed for dry interior rooms and should not be installed in wet areas. Use it to build a full feature wall, half wall paneling below a chair rail, a headboard feature or a run of picture frame moulding along a corridor.
FREE CUSTOM ARCHITECTURAL DESIGN SUPPORT
We do not just post you a box of trim. Send us a photo of your wall and your measurements and our team draws a custom wall molding layout for your exact space, panel sizes, spacing, margins and the position of sockets, doors and radiators all worked out before anything is cut. You approve the drawing, then we cut the kit to that plan. There is no charge for this service and no obligation to order. If you are unsure which wall molding design suits your ceiling height or your furniture, just ask and we will send you two or three options to compare.
HOW TO INSTALL, STEP BY STEP
1. Measure your wall and mark the panel layout with a pencil, a tape measure and a spirit level. Use the printed layout supplied with your kit.
2. Wipe the wall down so it is clean, dry and free of dust.
3. Glue On option: run construction adhesive suitable for MDF along the back of each piece.
4. Peel & Stick option: lift the liner and press the piece straight onto the wall, no adhesive, no drying time and no mess. This is the easiest route to DIY wall molding and the one most first timers choose.
5. Press each length into place and check it against your level before the adhesive grabs.
6. Fill the mitred joints and any small gaps with a flexible decorators filler, then sand lightly.
7. Prime if you wish and paint. The molding takes emulsion, eggshell or satin straight away.
No mitre saw, no cutting and no offcuts, every piece of wall trim arrives finished to size.
FREQUENTLY ASKED QUESTIONS
Q: What is the moulding on walls called?
A: Applied frames like these are called picture frame moulding, wall molding or wall trim. When they sit below a chair rail it is usually called wainscoting or half wall paneling.
Q: What is a molding frame?
A: A molding frame is a rectangle built from four lengths of trim fixed directly to the wall. It is not a box, the wall itself forms the panel, and the trim creates the shadow line around it.
Q: Which moulding is best for a wall?
A: This kit uses pre-cut MDF for a crisp, paintable architectural finish. MDF is intended for dry interior rooms.
Q: What are the different types of wall molding?
A: The common ones are picture frame moulding, board and batten, beadboard, slat walls and chair rail wainscoting. This kit is picture frame moulding, which is the most flexible because it can be scaled to any wall.
Q: How can I make a DIY moulding frame?
A: Traditionally you would measure, cut 45 degree mitres and hope the corners close. With a pre cut wall molding kit that step is already done, you mark the layout, fix the pieces and fill the joints.
Q: Does it come with adhesive?
A: The Glue On option does not include adhesive, so you supply a construction adhesive suitable for MDF. The Peel & Stick option arrives with the backing tape already applied and needs nothing else.
Q: Is it easy to paint, and can it be used in a bathroom?
A: Yes to both. The surface is smooth and takes primer and paint in one coat. MDF is intended for dry interior rooms and should not be installed in bathrooms or other wet areas.
SHIPPING, DUTIES & RETURNS • Free worldwide shipping on every order • DDP delivery all taxes and import duties are already included in the price • No customs charges, no hidden fees and no surprise costs on delivery for the United States, Canada, the United Kingdom and the European Union • Tracked express courier (FedEx, UPS or DHL) on every parcel • 14 day free returns and exchanges • Message us any time before or after ordering, we answer quickly and we are happy to help you plan the wall