Zu den Produktinformationen springen
1 von 11

Bedroom Board and Batten Picture Frame Wall Molding Set, Queen & King Size Molding Kit

Easy Installation

Bedroom Board and Batten Picture Frame Wall Molding Set, Queen & King Size Molding Kit | Easy Installation

Artikelnummer:TWH-4570344565-001

Normaler Preis $209.29
Normaler Preis Angebotspreis $209.29
Angebot Ausverkauft
✓ Kostenloser DDP-Versand in USA, CA, UK, IE und EU ✓ 14 Tage kostenlose Rückgabe ✓ Versand in 2–3 Werktagen
Unsicher, welche Größe zu deiner Wand passt? Kostenlos planen →
✓ KEINE ZÖLLE · KEINE STEUERN   ✓ KOSTENLOSE ARCHITEKTURPLANUNG
Design Size
Installation Type
Menge

Bedroom Board and Batten Picture Frame Wall Molding Set, Queen & King Size Molding Kit, Easy Installation. Sized for the wall behind a bed, these Self-Adhesive Board and Batten Picture Frames come in Queen Size and King Size layouts that center on the headboard. Battens and frames combine into one panel design, so the wall looks custom built. The trim is Paintable, and the self-adhesive option means no drilling into a bedroom wall.

Material

  • High-quality, durable hard polystyrene polymer
  • Not wood and not foam
  • Lightweight yet solid
  • Moisture resistant
  • Smooth, factory primed and ready to paint

Wall Molding Kit, Pre Cut Wall Molding, Self Adhesive Wall Trim, Board and Batten Kit is designed for homeowners and DIY renovators who want a polished architectural wall feature with balanced proportions, paintable detail, and a custom-built appearance. Strong vertical and horizontal lines help organize wide walls and work well in dining rooms, bedrooms, living areas, hallways, and home interiors. The hard polystyrene polymer profile is lightweight, smooth, paintable, and moisture resistant, offering a practical alternative to heavier wood-based trim for interior wall detailing. Its combination of molding, panel spacing, paintable detail, and room-specific sizing makes it relevant to wall paneling, wall trim, feature-wall, and DIY molding projects. The layout can be planned around wall width, room height, furniture placement, and preferred spacing so the finished installation feels intentional rather than generic. Careful spacing helps the finished molding feel integrated with the room. Designed to suit your wall furniture layout and room.

If you have custom wall measurements, please send us a message.

PANEL DIMENSIONS
• Technical drawing: the listing shows separate Queen Size and King Size pre-cut picture-frame layouts.
• Available variations: Queen Size or King Size; Non Adhesive or Self Adhesive installation.
If you cannot find the wall size you need, we can make a custom product to fit your wall measurements. Please feel free to send us a message.

OPTIONS

Choose your design size (Queen Size or King Size) and installation type (Non-Adhesive or Self-Adhesive).

Mirrors and artwork are not included.

WHERE IT WORKS
This decorative wall molding suits living rooms, bedrooms, dining rooms, hallways, stairwells, home offices, nurseries and rented flats. Because the molding is hard polystyrene polymer rather than timber or MDF wall panels, it also holds up in bathrooms, cloakrooms and utility rooms where moisture would swell a wooden wall trim. Use it to build a full feature wall, half wall paneling below a chair rail, a headboard feature or a run of picture frame moulding along a corridor.

FREE CUSTOM ARCHITECTURAL DESIGN SUPPORT
We do not just post you a box of trim. Send us a photo of your wall and your measurements and our team draws a custom wall molding layout for your exact space, panel sizes, spacing, margins and the position of sockets, doors and radiators all worked out before anything is cut. You approve the drawing, then we cut the kit to that plan. There is no charge for this service and no obligation to order. If you are unsure which wall molding design suits your ceiling height or your furniture, just ask and we will send you two or three options to compare.

HOW TO INSTALL, STEP BY STEP

1. Measure your wall and mark the panel layout with a pencil, a tape measure and a spirit level. Use the printed layout supplied with your kit.
2. Wipe the wall down so it is clean, dry and free of dust.
3. Glue On option: run construction adhesive suitable for polystyrene polymer along the back of each piece.
4. Peel & Stick option: lift the liner and press the piece straight onto the wall, no adhesive, no drying time and no mess. This is the easiest route to DIY wall molding and the one most first timers choose.
5. Press each length into place and check it against your level before the adhesive grabs.
6. Fill the mitred joints and any small gaps with a flexible decorators filler, then sand lightly.
7. Prime if you wish and paint. The molding takes emulsion, eggshell or satin straight away.
No mitre saw, no cutting and no offcuts, every piece of wall trim arrives finished to size.

FREQUENTLY ASKED QUESTIONS
Q: What is the moulding on walls called?
A: Applied frames like these are called picture frame moulding, wall molding or wall trim. When they sit below a chair rail it is usually called wainscoting or half wall paneling.

Q: What is a molding frame?
A: A molding frame is a rectangle built from four lengths of trim fixed directly to the wall. It is not a box, the wall itself forms the panel, and the trim creates the shadow line around it.

Q: Which moulding is best for a wall?
A: Lightweight hard polystyrene polymer is the easiest to live with. It is far lighter than timber, will not warp, split or absorb moisture like MDF wall panels, and it takes paint without raising a grain.

Q: What are the different types of wall molding?
A: The common ones are picture frame moulding, board and batten, beadboard, slat walls and chair rail wainscoting. This kit is picture frame moulding, which is the most flexible because it can be scaled to any wall.

Q: How can I make a DIY moulding frame?
A: Traditionally you would measure, cut 45 degree mitres and hope the corners close. With a pre cut wall molding kit that step is already done, you mark the layout, fix the pieces and fill the joints.

Q: Does it come with adhesive?
A: The Glue On option does not include adhesive, so you supply a construction adhesive suitable for polystyrene polymer. The Peel & Stick option arrives with the backing tape already applied and needs nothing else.

Q: Is it easy to paint, and can it be used in a bathroom?
A: Yes to both. The surface is smooth and takes primer and paint in one coat. Because hard polystyrene polymer does not absorb water, it is safe in bathrooms, cloakrooms and utility rooms.

SHIPPING, DUTIES & RETURNS • Free worldwide shipping on every order • DDP delivery all taxes and import duties are already included in the price • No customs charges, no hidden fees and no surprise costs on delivery for the United States, Canada, the United Kingdom and the European Union • Tracked express courier (FedEx, UPS or DHL) on every parcel • 14 day free returns and exchanges • Message us any time before or after ordering, we answer quickly and we are happy to help you plan the wall

Alle Details ansehen

Alles, was du wissen musst

Material
Hard polystyrene polymer
Maße
Design Size: Queen Size, King Size
Lieferumfang
Pre-cut molding pieces for the selected design and size, plus layout guidance. Adhesive is not included with Non-Adhesive variants.
Montage
Choose Non-Adhesive (use construction adhesive suitable for polystyrene polymer) or Self-Adhesive (pre-applied backing).
Versand

Kostenloser Versand in die USA, nach Kanada, Großbritannien und in die Europäische Union. Die Sets werden auf Bestellung zugeschnitten und mit Sendungsverfolgung verschickt. Lieferinformationen · Versandrichtlinie

Rückgabe

14 Tage Rückgaberecht für berechtigte Sets in Standardgröße. Maßanfertigungen werden nach deinen Maßen zugeschnitten und sind von der Rückgabe ausgeschlossen, außer sie kommen beschädigt an. Rückgabe- und Erstattungsrichtlinie

Häufige Fragen

Welcher Abstand ist zwischen den Leisten richtig?

Bei den meisten Board-and-Batten-Wänden liegen 30 bis 45 cm zwischen den Leisten. Mit unserem kostenlosen Board-and-Batten-Rechner bekommst du exakte, gleichmäßige Abstände für deine Wandbreite und die gewünschte Leistenzahl.

Geht Board and Batten auch an einer Wand mit Steckdosen?

Ja. Verschieb die Abstände leicht, damit Steckdosen und Schalter zwischen den Leisten liegen, oder frag uns nach einer kostenlosen Layoutzeichnung, in der wir die Abstände darum herum planen.

Muss ich etwas zuschneiden?

Nein. Jedes Teil kommt auf Länge geschnitten, die Rahmenecken sind bereits auf Gehrung geschnitten und nummeriert. Du zeichnest nur das Layout an, befestigst die Teile und streichst.

Plant Trim Wall Haus das Set für meine Wand?

Ja. Schick uns deine Wandmaße und ein Foto, und wir erstellen eine kostenlose Layoutzeichnung, die Deckenhöhe, Sockelleisten, Türen, Fenster und Steckdosen berücksichtigt, bevor du bestellst.

Wohin liefert Trim Wall Haus?

Wir liefern in die USA, nach Kanada, Großbritannien und in die Länder der Europäischen Union, kostenlos an alle diese Ziele.

See this kit on your wall in the free online Wall DesignerNEW · FREE Sieh dir dieses Set an deiner Wand an Lade ein Foto hoch oder nutze unseren Beispielraum, plane vorgeschnittene Wandleisten, selbstklebende Leisten oder eine halbhohe Wandverkleidung, probiere Farben aus und erhalte im kostenlosen Wand-Designer direkt einen Preis für dein Wandleisten-Set. Meinen Raum kostenlos planen