Wainscoting Peel and Stick Wall Molding Kit, 4 Upper, 4 Middle, and 4 Bottom Frames

Wainscoting Peel and Stick Wall Molding Kit, 4 Upper, 4 Middle, and 4 Bottom Frames, Easy Installation. Five tall frames side by side make the Vertical 5 Frame Wainscoting Kit a strong choice for wide walls with standard ceiling height. Choose a 1 inch or 1.6 inch molding. The kit comes non-adhesive or Self-Adhesive Paintable, ready to paint in the same color as the wall.

Material

• High-quality, durable hard polystyrene polymer
• Not wood and not foam
• Lightweight yet solid
• Moisture resistant
• Smooth, factory primed and ready to paint

This self adhesive wall trim turns a plain wall into a paneled feature wall with no saw, no nail gun and no filler. Every piece ships cut and mitered with the adhesive already applied, so the job is peel, press and paint.

It ships as made to measure wall panels: numbered parts, a printed layout reference and corners already mitered. That is what separates a real wall paneling kit from a bundle of raw lengths you still have to measure and cut down yourself.

What is in the kit

• Pre-cut molding to build 5 vertical frames
• Polystyrene profile with factory-mitered corners
• Adhesive backing applied at the factory: no nails, no adhesive gun
• Two profile widths to choose from: 25mm in width 13mm in thickness or 40mm in width 20mm in thickness
• Numbered pieces and a printed layout reference

How it goes up

1. Wipe the wall clean and let any fresh paint cure fully.
2. Mark the layout using the frame sizes supplied with the kit.
3. Peel the backing and press each piece home, working from the top rail down.
4. Caulk the inside corners for a seamless finish, then paint wall and molding in one color.

Sizing it to your wall

Getting the spacing right is the whole job. Measure the wall width and the height between the baseboard and the ceiling or crown, then run those numbers through our free wall panel calculator. It answers how to calculate wall panel spacing and wall panel layout measurements in one step, and returns the frame sizes and the clear gaps between them.

• Measure wall width and usable height, excluding baseboard and crown
• Decide how many frames you want across the wall
• Let the calculator set the margins and gaps so the run stays even corner to corner
• Order the kit whose layout matches the result

About the material

Polystyrene keeps the molding light enough to hold in one hand while you position it, and it is dimensionally stable, so mitered corners stay closed once the adhesive cures. It is supplied primed and ready for standard interior wall paint.

Where it works

Suited to bedroom, hallway and any flat, dry interior wall. Works as a full-height feature wall or as half wall paneling under a chair rail. Not intended for outdoor use, bathrooms with standing moisture, or walls with an ongoing damp problem.