Vertical Wainscoting Wall Molding Kit, 3 Vertical Frames

Vertical Wainscoting Wall Molding Kit, 3 Vertical Frames, Self-Adhesive Easy Installation. Vertical 3 Frame Wainscoting Panels place three tall frames along the lower wall, a neat fit for hallways and narrow rooms. Frame set options run from one to five sets, with a 1 inch or 1.6 inch molding. The kit is offered non-adhesive or as Self-Adhesive Paintable trim.

Material

• High-quality, durable hard polystyrene polymer
• Not wood and not foam
• Lightweight yet solid
• Moisture resistant
• Smooth, factory primed and ready to paint

This adhesive wall paneling turns a plain wall into a paneled feature wall with no saw, no nail gun and no filler. Every piece ships cut and mitered with the adhesive already applied, so the job is peel, press and paint.

It ships as ready to assemble wall panels: numbered parts, a printed layout reference and corners already mitered. That is what separates a real pre-cut wall molding from a bundle of raw lengths you still have to measure and cut down yourself.

What is in the kit

• Pre-cut molding to build 3 vertical frames
• Polystyrene profile with factory-mitered corners
• Adhesive backing applied at the factory: no nails, no adhesive gun
• Two profile widths to choose from: 25mm In width 13mm In thickness or 40mm In width 20mm In thickness
• Numbered pieces and a printed layout reference

How it goes up

1. Wipe the wall clean and let any fresh paint cure fully.
2. Mark the layout using the frame sizes supplied with the kit.
3. Peel the backing and press each piece home, working from the top rail down.
4. Caulk the inside corners for a seamless finish, then paint wall and molding in one color.

Sizing it to your wall

Getting the spacing right is the whole job. Measure the wall width and the height between the baseboard and the ceiling or crown, then run those numbers through our free wall panel calculator. It answers wall panel layout measurements and what measurements are needed for wall molding in one step, and returns the frame sizes and the clear gaps between them.

• Measure wall width and usable height, excluding baseboard and crown
• Decide how many frames you want across the wall
• Let the calculator set the margins and gaps so the run stays even corner to corner
• Order the kit whose layout matches the result

About the material

Polystyrene keeps the molding light enough to hold in one hand while you position it, and it is dimensionally stable, so mitered corners stay closed once the adhesive cures. It is supplied primed and ready for standard interior wall paint.

Where it works

Suited to bedroom, hallway and any flat, dry interior wall. Works as a full-height feature wall or as half wall paneling under a chair rail. Not intended for outdoor use, bathrooms with standing moisture, or walls with an ongoing damp problem.