Half Wall Shadow Box Ready to Assemble Wall Paneling Package, Factory Primed Half of Wall

Half Wall Shadow Box Ready to Assemble Wall Paneling Package, Factory Primed Half of Wall. Half Wall Shadow Box Wainscoting puts deep boxed panels along the lower wall, a durable look for hallways and dining rooms. The standard kit covers the full half wall layout. It is offered non-adhesive or Self-Adhesive Paintable, finished with the same paint as the wall.

Material

• High-quality, durable hard polystyrene polymer
• Not wood and not foam
• Lightweight yet solid
• Moisture resistant
• Smooth, factory primed and ready to paint

This shadow box molding gives a flat wall real architectural depth without the measuring, cutting and mitering a trim project usually involves. The pieces arrive pre-cut and ready to position, so the work on site is adhesive, filler and paint rather than a chop saw and a weekend of dust.

It ships as made to measure wall panels: numbered parts, a printed layout reference and corners already mitered. That is what separates a real decorative wall panels from a bundle of raw lengths you still have to measure and cut down yourself.

What is in the kit

• Polystyrene profile with factory-mitered corners
• Factory primed and ready to paint
• Numbered pieces and a printed layout reference

How it goes up

1. Wipe the wall clean and mark the layout for each frame.
2. Run construction adhesive along the back of each piece.
3. Press into place from the top rail down, taping or pinning until the adhesive cures.
4. Fill the joints, caulk the edges, sand lightly and paint.

Sizing it to your wall

Getting the spacing right is the whole job. Measure the wall width and the height between the baseboard and the ceiling or crown, then run those numbers through our free wall panel calculator. It answers what measurements are needed for wall molding and how to measure wall for wainscoting in one step, and returns the frame sizes and the clear gaps between them.

• Measure wall width and usable height, excluding baseboard and crown
• Decide how many frames you want across the wall
• Let the calculator set the margins and gaps so the run stays even corner to corner
• Order the kit whose layout matches the result

About the material

Polystyrene keeps the molding light enough to hold in one hand while you position it, and it is dimensionally stable, so mitered corners stay closed once the adhesive cures. It is supplied primed and ready for standard interior wall paint.

Where it works

Suited to living rooms, bedrooms, dining rooms, hallways and any flat, dry interior wall. Works as a full-height feature wall or as half wall paneling under a chair rail. Not intended for outdoor use, bathrooms with standing moisture, or walls with an ongoing damp problem.