Wall Molding Around Doorways: Frame Layout and Margins
Wall molding around doorways should end cleanly against the existing casing without affecting the door movement. Start with the full casing width and the available wall segment beside it.
Decisions before choosing this layout
| Decision | What to compare | Measurement to record |
|---|---|---|
| Decision 1 | Measure the opening including architraves and any projecting corner blocks. | Send casing-edge-to-corner measurements, door swing direction and casing projection. |
| Decision 2 | Check the handle sweep and door stop before placing molding behind an open door. | Mark the complete outside outline on the same measured elevation. |
| Decision 3 | For two nearby openings, plan the short space between them as its own field. | Mark the complete outside outline on the same measured elevation. |
Calculated design alternatives
| Option | Arrangement | Opening / width check | Height / radius check | Net trim | 10% allowance |
|---|---|---|---|---|---|
| Illustrated reservation | 1 frames | 83.5 in / 2120.9 mm smallest clear width | 85.5 in / 2171.7 mm smallest clear height | 29 linear ft / 8.839 m | 32 linear ft / 9.754 m |
| Reservation 6 in wider | 1 frames | 80.5 in / 2044.7 mm smallest clear width | 85.5 in / 2171.7 mm smallest clear height | 28.5 linear ft / 8.687 m | 32 linear ft / 9.754 m |
| Reservation 6 in farther right | 1 frames | 77.5 in / 1968.5 mm smallest clear width | 85.5 in / 2171.7 mm smallest clear height | 28 linear ft / 8.534 m | 31 linear ft / 9.449 m |
The 12 ft by 9 ft wall stays constant in this comparison. Each option has its own cut schedule; the schedule printed below belongs only to the illustrated option. Changing the reserved object width can affect side panels even when the wall size stays the same.
Cut schedule and material allowance
| Component | Quantity | Length each / run | Measurement basis |
|---|---|---|---|
| Right side horizontals | 2 | 86 in / 2184.4 mm | Outside long point; 45-degree corners |
| Right side verticals | 2 | 88 in / 2235.2 mm | Outside long point; 45-degree corners |
The listed components total 29 linear ft / 8.839 m. A 10% cutting allowance, rounded up to a whole foot, gives 32 linear ft / 9.754 m. This includes only the listed components; baseboards, adhesive, paint and unlisted return pieces are separate. Continuous rails are total runs, not a promise of one supplied piece.
Set out the actual outlines
| Element | Left edge | Top above floor | Width | Height |
|---|---|---|---|---|
| Frame 1 | 52 in / 1320.8 mm | 100 in / 2540 mm | 86 in / 2184.4 mm | 88 in / 2235.2 mm |
Worked scenario: replace the reserved object
| Object | Left edge from corner | Top above floor | Width | Height |
|---|---|---|---|---|
| Door / casing | 6 in / 152.4 mm | 100 in / 2540 mm | 40 in / 1016 mm | 100 in / 2540 mm |
Send casing-edge-to-corner measurements, door swing direction and casing projection. Replace the shaded reservation with that complete outline. Add the mounting or movement envelope separately; a decorative gap is not an electrical, appliance or mounting clearance. Compare the revised object with the frame coordinates before buying the trim.
How much allowance changes the order quantity
| Planning allowance | Rounded total | Extra over net material |
|---|---|---|
| 5% | 31 linear ft / 9.449 m | 2 linear ft / 0.61 m |
| 10% | 32 linear ft / 9.754 m | 3 linear ft / 0.914 m |
| 15% | 34 linear ft / 10.363 m | 5 linear ft / 1.524 m |
These percentages compare planning quantities; they do not optimize cuts into stock lengths. More corners, short supplied lengths or difficult joins can change the allowance. Confirm the actual packing list before ordering.
FREE WALL CALCULATOR
Plan your wall in 60 seconds
Enter your wall size. Get frame sizes, spacing, total molding length and your kit price. Save $20 on orders over $350 with code WALL20.
Calculate my wall Get a free design drawingShop Picture Frame Molding Kits
View all
Nested Frame Nursery Wall Molding Kit, Ready to AssembleFrom $300.00Choose options
Picture Frame Ready to Assemble Wall Molding Kit, 3 Upper & 3...From $217.20Choose options
Nested Picture Frame French Trim Wall Molding Kit, 2 Frames, ...From $132.00Choose options
Peel and Stick Wall Molding Kit, 3 Upper & 3 Bottom Picture F...From $90.00Choose options
Wall Panels for Living Room, Flat Wall Molding KitFrom $246.00Choose options
Box Molding Kit, Shadow Box 2 Upper, 1 Center & 2 Bottom FramesFrom $188.40Choose options
Picture Frame Molding Set, Double Frame 1 to 4 PanelsFrom $83.76Choose options
Square Pre-Cut Flat Wall Molding Kit for Living AreasFrom $352.80Choose options
Peel and Stick Wall Molding Kit, 2 Upper & 2 Bottom FramesFrom $96.00Choose options
Quick Easy to Apply Peel and Stick Wall Molding, 3 Upper & 3 ...From $206.40Choose options
Vertical Wainscoting Wall Molding Kit, 3 Vertical FramesFrom $108.00Choose options
Precut Bedroom Wall Trim Molding Kit, Ready to Assemble Wall ...From $282.00Choose optionsProduct images and kit choices
These images come from the linked Trim Wall Haus product listings. They show the product style; the pictured configuration is not automatically the cut schedule on this page.
Instant Nested Frame Wall Trim Molding Package Kits, 3 Upper & 3 Bottom Nested Frames | Quick Easy Installation
Picture Frame Pre-Cut Flat Wall Molding Kit for Living Areas | Factory Primed & Paintable
Minimalist Flat Picture Frame Wall Molding Kit | Self-Adhesive Easy InstallationQuestions for this specific plan
Can the trim continue behind an open door?
Check the handle sweep, door stop, hinges and casing projection. A clear rectangle on the elevation does not prove the door will pass in front of the molding without contact.
What measurements are assumed for this wall molding around doorways example?
The wall is 144 in / 3657.6 mm wide and 108 in / 2743.2 mm high. The drawing and outline tables show the remaining assumptions. Send casing-edge-to-corner measurements, door swing direction and casing projection.
How much trim is listed for the illustrated 12 ft wall?
The net listed schedule is 29 linear ft / 8.839 m; with a rounded 10% allowance it is 32 linear ft / 9.754 m. The alternatives above change the geometry and may change that total.
Will a product pictured below arrive in these exact dimensions?
Use the listing to check the supplied configuration, profile and installation method. The drawing is a design example; a changed wall, object outline or frame count requires confirmation of the actual kit parts.
Continue with your wall measurements
Usable openings and trim-face coverage
| Calculated measurement | Result |
|---|---|
| Wall area above assumed baseboard | 102.5 sq ft |
| Estimated area covered by trim faces | 2.977 sq ft |
| Wall area outside trim faces | 99.523 sq ft |
| Trim-face share of wall above baseboard | 2.905% |
| Largest framed/grid rectangular opening | 83.5 in / 2120.9 mm × 85.5 in / 2171.7 mm |
| Area of that rectangular opening | 49.578 sq ft |
| Artwork test with a 2-inch visual margin on all sides | 79.5 in / 2019.3 mm × 81.5 in / 2070.1 mm |
Face coverage is the union of the drawn trim strips, excluding the existing 5.5-inch baseboard. Curved profiles use a centerline-length × face-width estimate. Wall area outside trim still includes areas behind reserved furniture; it is not a visible-paint estimate. The artwork test is a visual comparison, not a mounting clearance. For an arch, the rectangular opening is measured below the spring line.
Cut-stock fit with two assumed lengths
| Profile group | Assumed stock length | Stock pieces in this packing | Unallocated stock / limitation | Interpretation |
|---|---|---|---|---|
| Straight frame / board profile | 96 in / 2438.4 mm | 4 | 36 in / 914.4 mm | Includes kerf and unusable remainder |
| Straight frame / board profile | 120 in / 3048 mm | 4 | 132 in / 3352.8 mm | Includes kerf and unusable remainder |
This is a first-fit decreasing packing example, not a claim of the minimum purchase quantity. Profile groups are packed separately; do not combine different actual products merely because they have the same nominal width. End trimming, damaged ends, join positions and fabrication details are not modeled. Stock lengths here are test inputs, not a statement of what the linked kits supply.
Related layouts and planning constraints
Plan around nearby features
Check the relevant room and obstacle guide before fixing the final divisions.
Kits for this project
Every kit ships pre-cut, primed and numbered. $10 off orders over $100 with code BLOG10.
Picture Frame Wall Molding Kit, 2 Upper & 2 Bottom Frames | Easy Installation
From $75
Wall Trim Molding Kit, 3 Upper, 3 Middle & 3 Bottom Frames | Pre-Cut Ready to Assemble
From $90
Picture Frame Ready to Assemble Wall Molding Kit, 3 Upper & 3 Bottom Frames | Easy Installation
From $181
More styles: Trim Wall Molding Kits Free wall molding calculator All wall molding guides
Ready to transform your wall?
Pre-cut, factory primed kits. Free shipping. $20 off orders over $350 with code WALL20.
Calculate my wall Shop Picture Frame Molding Kits