Double Frame Wall Molding: Inner and Outer Frame Spacing

Classic double frame wall molding places one outline inside another. The inner frame needs its own dimensions: its inset includes both the outer profile face and the clear space between profiles.

Worked example: 180 in / 4572 mm wall width, 108 in / 2743.2 mm ceiling. 16 frames; 199 linear ft / 60.655 m net listed trim.
Classic Double Frame Wall Molding: Nested Frame Spacing Calculated example in inches. Shaded areas reserve furniture or openings. See the component table for measurements.180 in / 457.2 cm wide108 in / 274.32 cm high
Calculated planning drawing, not a customer-project photograph or a promise that a standard kit has these dimensions. Replace all assumed dimensions with your measured wall.

Decisions before choosing this layout

Specific decisions for Classic Double Frame Wall Molding
Decision What to compare Measurement to record
Decision 1 Check that small lower panels still have a useful open center after both outlines are added. Provide the two profile face widths and the intended clear space between them.
Decision 2 Choose one measured clear gap between nested frames and carry it through every corner. Mark the complete outside outline on the same measured elevation.
Decision 3 Include both inner and outer frame pieces in the material calculation. Mark the complete outside outline on the same measured elevation.

Calculated design alternatives

Change one constraint and compare the complete plan
Option Arrangement Opening / width check Height / radius check Net trim 10% allowance
3 divisions 12 frames 43.5 in / 1104.9 mm smallest clear width 10.5 in / 266.7 mm smallest clear height 182 linear ft / 55.474 m 201 linear ft / 61.265 m
4 divisions 16 frames 29 in / 736.6 mm smallest clear width 10.5 in / 266.7 mm smallest clear height 199 linear ft / 60.655 m 219 linear ft / 66.751 m
5 divisions 20 frames 20.3 in / 515.62 mm smallest clear width 10.5 in / 266.7 mm smallest clear height 216 linear ft / 65.837 m 238 linear ft / 72.542 m

The 15 ft by 9 ft wall stays constant in this comparison. Each option has its own cut schedule; the schedule printed below belongs only to the illustrated option. Changing the reserved object width can affect side panels even when the wall size stays the same.

Cut schedule and material allowance

Components for the illustrated option
Component Quantity Length each / run Measurement basis
Upper frame 1 horizontals 2 37.5 in / 952.5 mm Outside long point; 45-degree corners
Upper frame 1 verticals 2 56 in / 1422.4 mm Outside long point; 45-degree corners
Upper inner 1 horizontals 2 31.5 in / 800.1 mm Outside long point; 45-degree corners
Upper inner 1 verticals 2 50 in / 1270 mm Outside long point; 45-degree corners
Upper frame 2 horizontals 2 37.5 in / 952.5 mm Outside long point; 45-degree corners
Upper frame 2 verticals 2 56 in / 1422.4 mm Outside long point; 45-degree corners
Upper inner 2 horizontals 2 31.5 in / 800.1 mm Outside long point; 45-degree corners
Upper inner 2 verticals 2 50 in / 1270 mm Outside long point; 45-degree corners
Upper frame 3 horizontals 2 37.5 in / 952.5 mm Outside long point; 45-degree corners
Upper frame 3 verticals 2 56 in / 1422.4 mm Outside long point; 45-degree corners
Upper inner 3 horizontals 2 31.5 in / 800.1 mm Outside long point; 45-degree corners
Upper inner 3 verticals 2 50 in / 1270 mm Outside long point; 45-degree corners
Upper frame 4 horizontals 2 37.5 in / 952.5 mm Outside long point; 45-degree corners
Upper frame 4 verticals 2 56 in / 1422.4 mm Outside long point; 45-degree corners
Upper inner 4 horizontals 2 31.5 in / 800.1 mm Outside long point; 45-degree corners
Upper inner 4 verticals 2 50 in / 1270 mm Outside long point; 45-degree corners
Lower frame 1 horizontals 2 37.5 in / 952.5 mm Outside long point; 45-degree corners
Lower frame 1 verticals 2 19 in / 482.6 mm Outside long point; 45-degree corners
Lower inner 1 horizontals 2 31.5 in / 800.1 mm Outside long point; 45-degree corners
Lower inner 1 verticals 2 13 in / 330.2 mm Outside long point; 45-degree corners
Lower frame 2 horizontals 2 37.5 in / 952.5 mm Outside long point; 45-degree corners
Lower frame 2 verticals 2 19 in / 482.6 mm Outside long point; 45-degree corners
Lower inner 2 horizontals 2 31.5 in / 800.1 mm Outside long point; 45-degree corners
Lower inner 2 verticals 2 13 in / 330.2 mm Outside long point; 45-degree corners
Lower frame 3 horizontals 2 37.5 in / 952.5 mm Outside long point; 45-degree corners
Lower frame 3 verticals 2 19 in / 482.6 mm Outside long point; 45-degree corners
Lower inner 3 horizontals 2 31.5 in / 800.1 mm Outside long point; 45-degree corners
Lower inner 3 verticals 2 13 in / 330.2 mm Outside long point; 45-degree corners
Lower frame 4 horizontals 2 37.5 in / 952.5 mm Outside long point; 45-degree corners
Lower frame 4 verticals 2 19 in / 482.6 mm Outside long point; 45-degree corners
Lower inner 4 horizontals 2 31.5 in / 800.1 mm Outside long point; 45-degree corners
Lower inner 4 verticals 2 13 in / 330.2 mm Outside long point; 45-degree corners
Chair rail planning run 1 180 in / 4572 mm Confirm joints and supplied lengths

The listed components total 199 linear ft / 60.655 m. A 10% cutting allowance, rounded up to a whole foot, gives 219 linear ft / 66.751 m. This includes only the listed components; baseboards, adhesive, paint and unlisted return pieces are separate. Continuous rails are total runs, not a promise of one supplied piece.

Set out the actual outlines

Element outside edges from the left corner and finished floor
Element Left edge Top above floor Width Height
Frame 1 6 in / 152.4 mm 100 in / 2540 mm 37.5 in / 952.5 mm 56 in / 1422.4 mm
Frame 2 9 in / 228.6 mm 97 in / 2463.8 mm 31.5 in / 800.1 mm 50 in / 1270 mm
Frame 3 49.5 in / 1257.3 mm 100 in / 2540 mm 37.5 in / 952.5 mm 56 in / 1422.4 mm
Frame 4 52.5 in / 1333.5 mm 97 in / 2463.8 mm 31.5 in / 800.1 mm 50 in / 1270 mm
Frame 5 93 in / 2362.2 mm 100 in / 2540 mm 37.5 in / 952.5 mm 56 in / 1422.4 mm
Frame 6 96 in / 2438.4 mm 97 in / 2463.8 mm 31.5 in / 800.1 mm 50 in / 1270 mm
Frame 7 136.5 in / 3467.1 mm 100 in / 2540 mm 37.5 in / 952.5 mm 56 in / 1422.4 mm
Frame 8 139.5 in / 3543.3 mm 97 in / 2463.8 mm 31.5 in / 800.1 mm 50 in / 1270 mm
Frame 9 6 in / 152.4 mm 33 in / 838.2 mm 37.5 in / 952.5 mm 19 in / 482.6 mm
Frame 10 9 in / 228.6 mm 30 in / 762 mm 31.5 in / 800.1 mm 13 in / 330.2 mm
Frame 11 49.5 in / 1257.3 mm 33 in / 838.2 mm 37.5 in / 952.5 mm 19 in / 482.6 mm
Frame 12 52.5 in / 1333.5 mm 30 in / 762 mm 31.5 in / 800.1 mm 13 in / 330.2 mm
Frame 13 93 in / 2362.2 mm 33 in / 838.2 mm 37.5 in / 952.5 mm 19 in / 482.6 mm
Frame 14 96 in / 2438.4 mm 30 in / 762 mm 31.5 in / 800.1 mm 13 in / 330.2 mm
Frame 15 136.5 in / 3467.1 mm 33 in / 838.2 mm 37.5 in / 952.5 mm 19 in / 482.6 mm
Frame 16 139.5 in / 3543.3 mm 30 in / 762 mm 31.5 in / 800.1 mm 13 in / 330.2 mm

Worked scenario: artwork and profile width

This 16 frames arrangement has 29 in / 736.6 mm smallest clear width and 10.5 in / 266.7 mm smallest clear height. Those clear openings subtract the assumed profile faces. Draw the outside artwork frame and any backplate within the opening, then compare another division count if the margins become narrow. Provide the two profile face widths and the intended clear space between them.

How much allowance changes the order quantity

Allowances for this exact component schedule
Planning allowance Rounded total Extra over net material
5% 209 linear ft / 63.703 m 10 linear ft / 3.048 m
10% 219 linear ft / 66.751 m 20 linear ft / 6.096 m
15% 229 linear ft / 69.799 m 30 linear ft / 9.144 m

These percentages compare planning quantities; they do not optimize cuts into stock lengths. More corners, short supplied lengths or difficult joins can change the allowance. Confirm the actual packing list before ordering.

FREE WALL CALCULATOR

Plan your wall in 60 seconds

Enter your wall size. Get frame sizes, spacing, total molding length and your kit price. Save $20 on orders over $350 with code WALL20.

Calculate my wall Get a free design drawing

Shop Picture Frame Molding Kits

View all
Nursery Box Molding Kit, light gray picture frame wall molding in a nurseryNested Frame Nursery Wall Molding Kit, Ready to AssembleFrom $300.00Choose optionsWhite Wall Molding Kit, olive green bedroom wall molding design behind the bedPicture Frame Ready to Assemble Wall Molding Kit, 3 Upper & 3...From $217.20Choose optionsModern Wall Molding Kit, green double picture frame wall molding in a hallwayNested Picture Frame French Trim Wall Molding Kit, 2 Frames, ...From $132.00Choose optionsLight blue picture frame wall molding in a living roomPeel and Stick Wall Molding Kit, 3 Upper & 3 Bottom Picture F...From $90.00Choose optionsFlat Wall Paneling Kit, white bedroom wall molding design behind the bedWall Panels for Living Room, Flat Wall Molding KitFrom $246.00Choose optionsSage green double picture frame wall molding in a bathroomBox Molding Kit, Shadow Box 2 Upper, 1 Center & 2 Bottom FramesFrom $188.40Choose optionsDark brown double picture frame wall molding in a living roomPicture Frame Molding Set, Double Frame 1 to 4 PanelsFrom $83.76Choose optionsModern Wall Trim, terracotta vertical slat wall molding in a dining roomSquare Pre-Cut Flat Wall Molding Kit for Living AreasFrom $352.80Choose optionsTerracotta picture frame wall molding in a living roomPeel and Stick Wall Molding Kit, 2 Upper & 2 Bottom FramesFrom $96.00Choose optionsBedroom wall molding design: taupe picture frame wall molding behind the bedQuick Easy to Apply Peel and Stick Wall Molding, 3 Upper & 3 ...From $206.40Choose optionsTerracotta picture frame wall molding in an entrywayVertical Wainscoting Wall Molding Kit, 3 Vertical FramesFrom $108.00Choose optionsBedroom Wall Molding Kit, sage green herringbone wall molding on an accent wallPrecut Bedroom Wall Trim Molding Kit, Ready to Assemble Wall ...From $282.00Choose options

Product images and kit choices

These images come from the linked Trim Wall Haus product listings. They show the product style; the pictured configuration is not automatically the cut schedule on this page.

Instant Nested Frame Wall Trim Molding Package Kits, 3 Upper & 3 Bottom Nested Frames | Quick Easy InstallationInstant Nested Frame Wall Trim Molding Package Kits, 3 Upper & 3 Bottom Nested Frames | Quick Easy Installation
Image from the linked product listing. Compare its configuration with the drawing.
Nested Wall Molding Package Kits, 3 Upper & 3 Bottom Nested Frames | Easy InstallationNested Wall Molding Package Kits, 3 Upper & 3 Bottom Nested Frames | Easy Installation
Image from the linked product listing. Compare its configuration with the drawing.
Nested Frame Nursery Wall Molding Kit, Ready to Assemble | 3 Upper & 3 Bottom Nested FramesNested Frame Nursery Wall Molding Kit, Ready to Assemble | 3 Upper & 3 Bottom Nested Frames
Image from the linked product listing. Compare its configuration with the drawing.

Questions for this specific plan

Which gap matters between the inner and outer frames?

Measure the clear space between the molding faces. The inset from the outer outside edge also includes the outer profile width, so the inner outside size cannot be found by subtracting the clear gap alone.

What measurements are assumed for this classic double frame wall molding example?

The wall is 180 in / 4572 mm wide and 108 in / 2743.2 mm high. The drawing and outline tables show the remaining assumptions. Provide the two profile face widths and the intended clear space between them.

How much trim is listed for the illustrated 15 ft wall?

The net listed schedule is 199 linear ft / 60.655 m; with a rounded 10% allowance it is 219 linear ft / 66.751 m. The alternatives above change the geometry and may change that total.

Will a product pictured below arrive in these exact dimensions?

Use the listing to check the supplied configuration, profile and installation method. The drawing is a design example; a changed wall, object outline or frame count requires confirmation of the actual kit parts.

Continue with your wall measurements

Plan my wallCompare matching kitsSend a drawing for review

Usable openings and trim-face coverage

Additional measurements calculated from this exact drawing
Calculated measurement Result
Wall area above assumed baseboard 128.125 sq ft
Estimated area covered by trim faces 21.597 sq ft
Wall area outside trim faces 106.528 sq ft
Trim-face share of wall above baseboard 16.856%
Largest framed/grid rectangular opening 29 in / 736.6 mm × 47.5 in / 1206.5 mm
Area of that rectangular opening 9.566 sq ft
Artwork test with a 2-inch visual margin on all sides 25 in / 635 mm × 43.5 in / 1104.9 mm

Face coverage is the union of the drawn trim strips, excluding the existing 5.5-inch baseboard. Curved profiles use a centerline-length × face-width estimate. Wall area outside trim still includes areas behind reserved furniture; it is not a visible-paint estimate. The artwork test is a visual comparison, not a mounting clearance. For an arch, the rectangular opening is measured below the spring line.

Cut-stock fit with two assumed lengths

Illustrative packing with a 1/8-inch gap between cuts; confirm actual supplied lengths
Profile group Assumed stock length Stock pieces in this packing Unallocated stock / limitation Interpretation
Straight frame / board profile 96 in / 2438.4 mm 25 192 in / 4876.8 mm Includes kerf and unusable remainder
Straight frame / board profile 120 in / 3048 mm 20 192 in / 4876.8 mm Includes kerf and unusable remainder
Chair rail 96 in / 2438.4 mm Not a no-splice fit 1 listed pieces/runs exceed this length Review joints or another supplied length
Chair rail 120 in / 3048 mm Not a no-splice fit 1 listed pieces/runs exceed this length Review joints or another supplied length

This is a first-fit decreasing packing example, not a claim of the minimum purchase quantity. Profile groups are packed separately; do not combine different actual products merely because they have the same nominal width. End trimming, damaged ends, join positions and fabrication details are not modeled. Stock lengths here are test inputs, not a statement of what the linked kits supply.

Related layouts and planning constraints

Odd wall size, a door or a window in the way? Send your wall width and height and get a free layout drawing and quote within 24 hours. Send your wall size

Kits for this project

Every kit ships pre-cut, primed and numbered. $10 off orders over $100 with code BLOG10.

Picture Frame Wall Molding Kit, 2 Upper & 2 Bottom Frames | Easy Installation

Picture Frame Wall Molding Kit, 2 Upper & 2 Bottom Frames | Easy Installation
From $75

View kitGet $10 off
Wall Trim Molding Kit, 3 Upper, 3 Middle & 3 Bottom Frames | Pre-Cut Ready to Assemble

Wall Trim Molding Kit, 3 Upper, 3 Middle & 3 Bottom Frames | Pre-Cut Ready to Assemble
From $90

View kitGet $10 off
Picture Frame Ready to Assemble Wall Molding Kit, 3 Upper & 3 Bottom Frames | Easy Installation

Picture Frame Ready to Assemble Wall Molding Kit, 3 Upper & 3 Bottom Frames | Easy Installation
From $181

View kitGet $10 off

More styles: Trim Wall Molding Kits Free wall molding calculator All wall molding guides

Ready to transform your wall?

Pre-cut, factory primed kits. Free shipping. $20 off orders over $350 with code WALL20.

Calculate my wall Shop Picture Frame Molding Kits