Not the size you need? Get a free custom design in 24 hours, or design your own wall.

Design your wall, free
Skip to product information
1 of 1

Custom Mimi Santora – 5 Panel Picture Frame Wall Molding Kit – Self-Adhesive 2.5 cm

Custom Mimi Santora – 5 Panel Picture Frame Wall Molding Kit – Self-Adhesive 2.5 cm

SKU:TWH-CUSTOM-MIMI-5FRAME

Regular price $382.80
Regular price Sale price $382.80
Sale Sold out
✓ Free shipping to US, CA, UK, IE & EU ✓ 14-day free returns ✓ Ships in 2–3 business days
✓ NO EXTRA FEES AT DELIVERY   ✓ FREE ARCHITECTURAL DESIGN SUPPORT
Quantity

Custom Family Room Wall Molding Kit for Mimi Santora

Custom pre-cut, paintable, self-adhesive picture frame molding kit for one TV wall and both sides of a fireplace. Five single rectangular frames, no chair rail or smaller lower panels.

TV Wall (final, 196 inches)

Wall: 196 inches (498 cm) wide, 101 inches usable height. Left frame: 31 × 89 inches. Center TV frame: 110 × 89 inches. Right frame: 31 × 89 inches. Equal 6-inch spacing at both ends, between frames, above and below (6 + 31 + 6 + 110 + 6 + 31 + 6 = 196). A centered 99-inch media console leaves about 5.5 inches on each side inside the center frame.

Fireplace Wall (final)

Two single tall frames, each 48 × 89 inches, with 6-inch spacing. Both fireplace-side wall sections are 60 inches wide; the frames clear the mantle and outlets.

Product Details

2.5 cm (about 1 inch) wide, 13 mm deep, primed and paint-ready polystyrene molding; self-adhesive peel-and-stick backing; all corners pre-cut at 45 degrees; long runs shipped as numbered sections. Seams can be filled with paintable acrylic caulk or joint compound, lightly sanded and painted.

Total trim length: approximately 36.2 meters. Price includes free shipping with no extra fees on delivery. Production: 2 to 3 business days; delivery: 3 to 4 business days after dispatch.

View full details

Everything you need to know

Kit format
Pre-cut wall molding prepared for DIY installation
Finish
Paintable surface for a built-in architectural look
Recommended use
Flat, clean and dry interior walls
Design support
Complimentary wall layout assistance before you order
Installation
  1. Clean and measure the wall, then mark the supplied layout.
  2. Dry-fit the numbered pieces before applying adhesive.
  3. Fix each piece with the recommended construction adhesive or the supplied self-adhesive backing.
  4. Fill and caulk where required, then paint after the adhesive has cured.
Shipping

Free shipping to the United States, Canada, the United Kingdom and the European Union. Kits are cut to order and shipped with tracking. Delivery information · Shipping policy

Returns

14-day returns on eligible standard-size kits. Custom-cut kits are made to your measurements and are not returnable unless they arrive damaged. Refund and return policy

Custom Mimi Santora FAQs

Does the Custom Mimi Santora stick to any wall?

The self-adhesive backing bonds best to smooth, clean, dry painted drywall or plaster. Wipe the wall first, let fresh paint cure fully, and press each piece firmly for 30 seconds. Heavily textured or flaking walls need construction adhesive instead.

Is the Custom Mimi Santora renter friendly?

Yes. Peel and stick molding needs no nails, screws or saw. On well-bonded paint it can usually be removed with gentle heat and slow peeling, but always test a small area first because some paints can lift.

Do I need to cut the Custom Mimi Santora?

No. Every piece arrives cut to length with the frame corners already mitered and numbered, so you only mark the layout, fix the pieces and paint.

Can Trim Wall Haus plan the Custom Mimi Santora for my wall?

Yes. Send your wall measurements and a photo, and we create a free custom layout drawing that accounts for ceiling height, baseboards, doors, windows and outlets before you order.

Where does Trim Wall Haus ship?

We ship to the United States, Canada, the United Kingdom and European Union countries, with free shipping to these destinations.