Wall Molding Kits in United States: Delivery and Project Planning
Plan an online wall molding order for delivery to United States with two separate records: a measured wall drawing and a complete receiving address. This guide connects a worked layout, component quantities and destination checks; it does not claim a local showroom or local installation team.
Worked order brief for United States
Compare a single accent wall with a coordinated two-wall room order. Confirm each wall separately before combining the quantities.
The following 12 ft by 9 ft wall is a hypothetical design example, not a measured home or customer project in United States. Write wall measurements in inches, with fractions or decimals clearly marked. Include the complete delivery address and ZIP Code when checking the order.
Destination details to check before dispatch
| Field | What to confirm |
|---|---|
| Delivery country | United States |
| Province / state | Use the recipient’s state |
| Address unit | Apartment or suite, where applicable |
| Postal field | Recipient’s five-digit ZIP Code or ZIP+4 |
| Drawing unit | One master unit, repeated on every dimension |
Reference: USPS state abbreviations. These format checks do not confirm service availability or delivery time for an individual address.
Compare the quantities before choosing a kit
| Option | Arrangement | Width check | Height check | Net trim | 10% allowance |
|---|---|---|---|---|---|
| 2 divisions | 4 frames | 60.5 in / 1536.7 mm smallest clear width | 16.5 in / 419.1 mm smallest clear height | 79 linear ft / 24.079 m | 87 linear ft / 26.518 m |
| 3 divisions | 6 frames | 37.5 in / 952.5 mm smallest clear width | 16.5 in / 419.1 mm smallest clear height | 89.5 linear ft / 27.28 m | 99 linear ft / 30.175 m |
| 4 divisions | 8 frames | 26 in / 660.4 mm smallest clear width | 16.5 in / 419.1 mm smallest clear height | 100 linear ft / 30.48 m | 111 linear ft / 33.833 m |
Cut schedule and material allowance
| Component | Quantity | Length each / run | Measurement basis |
|---|---|---|---|
| Upper frame 1 horizontals | 2 | 40 in / 1016 mm | Outside long point; 45-degree corners |
| Upper frame 1 verticals | 2 | 56 in / 1422.4 mm | Outside long point; 45-degree corners |
| Upper frame 2 horizontals | 2 | 40 in / 1016 mm | Outside long point; 45-degree corners |
| Upper frame 2 verticals | 2 | 56 in / 1422.4 mm | Outside long point; 45-degree corners |
| Upper frame 3 horizontals | 2 | 40 in / 1016 mm | Outside long point; 45-degree corners |
| Upper frame 3 verticals | 2 | 56 in / 1422.4 mm | Outside long point; 45-degree corners |
| Lower frame 1 horizontals | 2 | 40 in / 1016 mm | Outside long point; 45-degree corners |
| Lower frame 1 verticals | 2 | 19 in / 482.6 mm | Outside long point; 45-degree corners |
| Lower frame 2 horizontals | 2 | 40 in / 1016 mm | Outside long point; 45-degree corners |
| Lower frame 2 verticals | 2 | 19 in / 482.6 mm | Outside long point; 45-degree corners |
| Lower frame 3 horizontals | 2 | 40 in / 1016 mm | Outside long point; 45-degree corners |
| Lower frame 3 verticals | 2 | 19 in / 482.6 mm | Outside long point; 45-degree corners |
| Chair rail planning run | 1 | 144 in / 3657.6 mm | Confirm joints and supplied lengths |
The listed components total 89.5 linear ft / 27.28 m. A 10% cutting allowance, rounded up to a whole foot, gives 99 linear ft / 30.175 m. This includes only the listed components; baseboards, adhesive, paint and unlisted return pieces are separate. Continuous rails are total runs, not a promise of one supplied piece.
Drawing dimensions in inches and metric
| Measurement | Inches | Millimetres | Centimetres |
|---|---|---|---|
| Wall width | 144 | 3657.6 | 365.76 |
| Ceiling height | 108 | 2743.2 | 274.32 |
| Assumed profile face | 1.25 | 31.75 | 3.175 |
| Element | Left edge | Top above floor | Width | Height |
|---|---|---|---|---|
| Frame 1 | 6 in / 152.4 mm | 100 in / 2540 mm | 40 in / 1016 mm | 56 in / 1422.4 mm |
| Frame 2 | 52 in / 1320.8 mm | 100 in / 2540 mm | 40 in / 1016 mm | 56 in / 1422.4 mm |
| Frame 3 | 98 in / 2489.2 mm | 100 in / 2540 mm | 40 in / 1016 mm | 56 in / 1422.4 mm |
| Frame 4 | 6 in / 152.4 mm | 33 in / 838.2 mm | 40 in / 1016 mm | 19 in / 482.6 mm |
| Frame 5 | 52 in / 1320.8 mm | 33 in / 838.2 mm | 40 in / 1016 mm | 19 in / 482.6 mm |
| Frame 6 | 98 in / 2489.2 mm | 33 in / 838.2 mm | 40 in / 1016 mm | 19 in / 482.6 mm |
Worked scenario: ordering for more than one wall
| Scope | Combined net trim | Combined 10% allowance | Component count |
|---|---|---|---|
| 1 identical example walls | 89.5 linear ft / 27.28 m | 99 linear ft / 30.175 m | 25 listed pieces / runs |
| 2 identical example walls | 179 linear ft / 54.559 m | 197 linear ft / 60.046 m | 50 listed pieces / runs |
| 3 identical example walls | 268.5 linear ft / 81.839 m | 296 linear ft / 90.221 m | 75 listed pieces / runs |
This table adds material quantities only. It does not predict parcel count, carton length, freight price or delivery time. A different return wall or second room needs its own dimensions and layout before its quantities can be combined.
Confirm the order in the right sequence
| Stage | Confirm before proceeding |
|---|---|
| Choose the layout | Replace the 144 × 108 inch wall and each reservation with actual measurements. |
| Choose the product | Check material, actual profile face, supplied frame count and installation method. |
| Approve a custom configuration | Review the final drawing and component list; check return eligibility before placing the order. |
| Check the destination | Confirm United States, the country field, full recipient address and unit details. |
| Review the current terms | Read preparation, transit estimates, shipping coverage and return terms for the selected configuration. |
Current shipping policy · Current return policy · Ask about a drawing or delivery address
A general transit estimate is not an address-specific guarantee. The policy and the confirmed order apply; this example does not create a separate regional delivery promise.
Product images and kit choices
These images come from the linked Trim Wall Haus product listings. They show the product style; the pictured configuration is not automatically the cut schedule on this page.
Instant Nested Frame Wall Trim Molding Package Kits, 3 Upper & 3 Bottom Nested Frames | Quick Easy Installation
Picture Frame Pre-Cut Flat Wall Molding Kit for Living Areas | Factory Primed & Paintable
Minimalist Flat Picture Frame Wall Molding Kit | Self-Adhesive Easy InstallationQuestions for this specific plan
Should I send wall dimensions or parcel dimensions?
Send finished wall and obstacle dimensions for design. The confirmed component list determines packing; the wall width is not the shipping-carton length.
Is this a completed customer project in United States?
No. It is a calculated example with explicitly assumed wall dimensions. The product images link to actual store listings, but they are not evidence of a completed local installation.
How much molding does this 12 ft example need?
The listed components total 89.5 linear ft / 27.28 m; the rounded 10% planning allowance is 99 linear ft / 30.175 m. Confirm the selected product configuration rather than assuming a pictured package includes these exact pieces.
Can this page guarantee a delivery date in United States?
No. Confirm the full address and review the current shipping policy and order information. Custom preparation, carrier transit and the building’s receiving arrangements are separate checks.
Continue with your wall measurements
Usable openings and trim-face coverage
| Calculated measurement | Result |
|---|---|
| Wall area above assumed baseboard | 102.5 sq ft |
| Estimated area covered by trim faces | 10.312 sq ft |
| Wall area outside trim faces | 92.188 sq ft |
| Trim-face share of wall above baseboard | 10.061% |
| Largest framed/grid rectangular opening | 37.5 in / 952.5 mm × 53.5 in / 1358.9 mm |
| Area of that rectangular opening | 13.932 sq ft |
| Artwork test with a 2-inch visual margin on all sides | 33.5 in / 850.9 mm × 49.5 in / 1257.3 mm |
Face coverage is the union of the drawn trim strips, excluding the existing 5.5-inch baseboard. Curved profiles use a centerline-length × face-width estimate. Wall area outside trim still includes areas behind reserved furniture; it is not a visible-paint estimate. The artwork test is a visual comparison, not a mounting clearance. For an arch, the rectangular opening is measured below the spring line.
Cut-stock fit with two assumed lengths
| Profile group | Assumed stock length | Stock pieces in this packing | Unallocated stock / limitation | Interpretation |
|---|---|---|---|---|
| Straight frame / board profile | 96 in / 2438.4 mm | 12 | 222 in / 5638.8 mm | Includes kerf and unusable remainder |
| Straight frame / board profile | 120 in / 3048 mm | 9 | 150 in / 3810 mm | Includes kerf and unusable remainder |
| Chair rail | 96 in / 2438.4 mm | Not a no-splice fit | 1 listed pieces/runs exceed this length | Review joints or another supplied length |
| Chair rail | 120 in / 3048 mm | Not a no-splice fit | 1 listed pieces/runs exceed this length | Review joints or another supplied length |
This is a first-fit decreasing packing example, not a claim of the minimum purchase quantity. Profile groups are packed separately; do not combine different actual products merely because they have the same nominal width. End trimming, damaged ends, join positions and fabrication details are not modeled. Stock lengths here are test inputs, not a statement of what the linked kits supply.
Destination-specific address and project checks
California: address and project checks
Use CA in the province/state field and select United States as the country. For a unit or apartment, include its identifier in the shipping address and check the building's parcel instructions before dispatch. On the wall sketch, reserve the full headboard and bedside electrical plates.
Does CA identify California or Canada on my order?
For a California destination, CA is the state abbreviation and United States is the country. Canada is a different country selection; check these separate checkout fields before dispatch.
Texas: address and project checks
Use TX in the province/state field and select United States as the country. For the wide-wall example, start from the actual TV casing and bracket travel, then compare the side panels. Confirm the final street address before a custom kit is prepared.
Can a larger television use the same side-frame layout?
Measure the actual casing and bracket envelope. Increasing the central reservation reduces one or both side fields, so compare the wider-reservation calculation rather than changing the screen label alone.
Florida: address and project checks
Use FL in the province/state field and select United States as the country. The dining-wall example uses lower panel frames beneath a rail. Check that the intended interior wall is dry and that the selected product and adhesive suit the substrate before ordering.
Does the drawing certify the wall for adhesive installation?
No. Confirm the chosen product, coating condition and adhesive instructions on the actual interior surface. A layout drawing does not establish moisture resistance or suitability for a damp wall.
New York: address and project checks
Use NY in the province/state field and select United States as the country. The entry-wall example reserves a console below the frames. For building deliveries, include the unit information and check who can receive the parcel during the carrier's delivery window.
What should I confirm for a building delivery?
Include the unit or suite and confirm who can receive the parcel. Check building receiving rules before dispatch; do not assume the carrier can provide a particular access or appointment service.
Washington: address and project checks
Use WA in the province/state field and select United States as the country. The batten example uses a 75 mm face width and shows the remaining clear bays. Send the installed profile width with the drawing and check that the shipping state is Washington, WA.
Is WA the same destination as Washington, DC?
No. WA is Washington state. District of Columbia uses DC. Select the intended state or district and its matching ZIP Code in the delivery address.
Illinois: address and project checks
Use IL in the province/state field and select United States as the country. For the sofa-wall example, mark the furniture centerline independently from the wall midpoint. If the surface has been patched or repainted, follow the coating and adhesive instructions before fitting trim.
What if my sofa is not centered on the wall?
Measure its center from the same corner as the wall drawing. Compare a sofa-centered frame composition with a wall-centered one before ordering equal end margins.