Peel and Stick Board and Batten: Paintable Kits & Layouts
Peel and stick board and batten gives you the vertical batten look without nails, a saw or a stud finder. The battens come with adhesive tape on the back, so the main job is spacing them evenly.
Renter-friendly, if you prep the wall
Adhesive battens hold on smooth, painted drywall. Clean the wall with isopropyl alcohol first and press each batten for 30 seconds. For removal later, warm each batten with a hair dryer and peel slowly. On textured or freshly painted walls add a dot of removable mounting adhesive.
Batten height choices
A ledge at 5 ft on an 8 ft ceiling is the classic farmhouse proportion. A ledge at 42 inches makes a half wall, and floor-to-ceiling battens suit a feature wall behind a bed.
Batten count by wall width (16 in target spacing)
| Wall | Battens | Gap |
|---|---|---|
| 8 ft | 6 | 15.5 in |
| 10 ft | 7 | 16.5 in |
| 12 ft | 8 | 17 in |
| 14 ft | 10 | 15.5 in |
| 16 ft | 11 | 16 in |
FREE WALL CALCULATOR
Plan your wall in 60 seconds
Enter your wall size. Get frame sizes, spacing, total molding length and your kit price. Save $20 on orders over $350 with code WALL20.
Calculate my wall Get a free design drawingShop Board and Batten Kits
View all
Board and Batten Wall Kit, Shaker Grid 1 to 5 SetsFrom $83.76Choose options
Bedroom Board and Batten Picture Frame Wall Molding Set, Quee...From $209.29Choose options
Shaker Board and Batten Grid Wainscoting Kit, 1 to 5 SetsFrom $83.76Choose options
Square Grid Board and Batten Accent Wall KitFrom $302.89Choose options
Accent Board and Batten Design Wall Covering Kit, Factory PrimedFrom $728.40Choose options
Decorative Board and Batten Wall Accent Molding KitFrom $930.00Choose options
Pre-Cut Board and Batten Wall Trim Panels, Easy DIY Wall Moul...From $879.60Choose options
Paintable Pre-Cut Wall Design: Ready to Assemble Board & Batt...$1,008.00Choose options
Heritage DIY Board and Batten Panels, Pre-Cut MDF for Fast In...$697.20Choose options
DIY Hassle-Free Board & Batten Wall Makeovers$618.00Choose options
Quick Install MDF Board and Batten Panels, Trim Wall Molding ...$710.40Choose optionsExample: 10 ft wall
On a 10 ft wall use 7 vertical battens (3" wide) spaced 1' 4.5" (42 cm) apart, with the top rail at 5' (152 cm). Total about 46 linear ft with waste.
Full cut lists: 10 ft · 12 ft · 12 ft with 9 ft ceiling · 16 ft with 9 ft ceiling
Common questions
Does peel and stick board and batten look real?
Once caulked and painted the same color as the wall, yes. The 8 to 10 mm thickness casts the same shadow lines as nailed MDF battens.
Can I paint peel and stick battens?
Yes. Our battens arrive primed; wait 24 hours after sticking, caulk the edges, then paint with a satin or eggshell finish.
Will it damage the wall when removed?
Usually only a light touch-up is needed. Warm the adhesive and pull slowly at a low angle; avoid fresh paint under two weeks old.
Get it pre-cut
- Shaker Board and Batten Grid Wainscoting Kit, Self-Adhesive, from $70
- Peel and Stick Board and Batten Picture Frame Molding Set, from $115
- Square Grid Board and Batten Accent Wall Kit, from $252
Shop all board and batten kits · Batten trim guide · Plan your wall free
Kits for this project
Every kit ships pre-cut, primed and numbered. $10 off orders over $100 with code BLOG10.

Peel and Stick Wall Molding Kit, 3 Upper & 3 Bottom Picture Frames | Self-Adhesive Trim
From $75

Picture Frame Renter Friendly Peel and Stick Wall Trim Kit, 3 Frames | Quick Easy Installation
From $70

Peel and Stick Wainscoting Accent Wall Molding Kit, 2 to 4 Panels | Easy Installation
From $47.12
More styles: Peel and Stick Wall Molding Kits Free wall molding calculator All wall molding guides
Ready to transform your wall?
Pre-cut, factory primed kits. Free shipping. $20 off orders over $350 with code WALL20.
Calculate my wall Shop Board and Batten Kits