Batten Trim for Walls: Widths, Spacing & Kits
Batten trim is the flat strip used to make board and batten walls. Unlike decorative moulding it has square edges, so the look depends almost entirely on width and spacing.
Batten widths
2.5 to 3.5 inch (60 to 90 mm) battens suit most rooms. Narrow battens look delicate on short walls; wider battens look bolder on tall walls and with ledges. Thickness of 8 to 12 mm is plenty for interior walls.
Vertical, grid or horizontal
Vertical battens make a room feel taller. Adding horizontal battens creates a grid (shaker style). Horizontal-only battens widen a narrow hallway visually.
FREE WALL CALCULATOR
Plan your wall in 60 seconds
Enter your wall size. Get frame sizes, spacing, total molding length and your kit price. Save $20 on orders over $350 with code WALL20.
Calculate my wall Get a free design drawingShop Board and Batten Kits
View all
Board and Batten Wall Kit, Shaker Grid 1 to 5 SetsFrom $83.76Choose options
Bedroom Board and Batten Picture Frame Wall Molding Set, Quee...From $209.29Choose options
Shaker Board and Batten Grid Wainscoting Kit, 1 to 5 SetsFrom $83.76Choose options
Square Grid Board and Batten Accent Wall KitFrom $302.89Choose options
Accent Board and Batten Design Wall Covering Kit, Factory PrimedFrom $728.40Choose options
Decorative Board and Batten Wall Accent Molding KitFrom $930.00Choose options
Pre-Cut Board and Batten Wall Trim Panels, Easy DIY Wall Moul...From $879.60Choose options
Paintable Pre-Cut Wall Design: Ready to Assemble Board & Batt...$1,008.00Choose options
Heritage DIY Board and Batten Panels, Pre-Cut MDF for Fast In...$697.20Choose options
DIY Hassle-Free Board & Batten Wall Makeovers$618.00Choose options
Quick Install MDF Board and Batten Panels, Trim Wall Molding ...$710.40Choose optionsExample layouts with real measurements
8 ft wall, 9 ft ceiling
On an 8 ft wall use 6 vertical battens (3" wide) spaced 1' 3.5" (39 cm) apart, with the top rail at 5' 7.5" (171 cm). Total about 43 linear ft with waste.
10 ft wall, 9 ft ceiling
On a 10 ft wall use 7 vertical battens (3" wide) spaced 1' 4.5" (42 cm) apart, with the top rail at 5' 7.5" (171 cm). Total about 50 linear ft with waste.
Common questions
What size batten is best for board and batten?
A 3 inch (75 mm) wide, 8 to 10 mm thick batten is the most versatile size. Go up to 3.5 inches on walls over 9 ft or when the battens run floor to ceiling.
Do battens need to go into studs?
No. Light MDF battens hold on drywall with construction adhesive and a few brad nails angled in opposite directions. Hitting studs is a bonus, not a requirement.
Should the battens start at the corners?
Yes. Put a batten tight into each corner, then divide the space between them equally. That keeps both ends of the wall symmetrical.
Get it pre-cut
Every Trim Wall Haus kit ships pre-cut, numbered, factory primed and ready to paint.
- Quick Install MDF Board and Batten Panels, from $592
- Square Grid Board and Batten Accent Wall Kit, from $252
- Shaker Board and Batten Grid Wainscoting Kit, from $70
Shop all board and batten kits · Plan your wall free
Measured layouts: 10 ft wall, 9 ft ceiling · 12 ft wall, 9 ft ceiling · all sizes
Kits for this project
Every kit ships pre-cut, primed and numbered. $10 off orders over $100 with code BLOG10.

Board and Batten Half Wall Paneling Kit with Chair Rail | Pre-Cut MDF Easy Installation
From $31.42

Board and Batten Wall Kit, Shaker Grid 1 to 5 Sets | Self-Adhesive Wainscoting
From $69.8

Quick Install MDF Board and Batten Panels, Trim Wall Molding Kits | Easy DIY Solution W:75mm x T:8mm
From $592
More styles: Board and Batten Wall Kits Free wall molding calculator All wall molding guides
Ready to transform your wall?
Pre-cut, factory primed kits. Free shipping. $20 off orders over $350 with code WALL20.
Calculate my wall Shop Board and Batten Kits