MDF Wall Mouldings: Profiles, Sizes & Pre-Cut Kits
MDF wall mouldings are profiled strips of medium density fibreboard used for panelling, frames and rails. They are the standard material for interior wall trim because they are straight, smooth and cheap compared with solid wood.
MDF vs pine vs polyurethane
| MDF | Pine | Polyurethane | |
|---|---|---|---|
| Straightness | Excellent | Can bow | Excellent |
| Paint finish | Smooth | Grain shows | Smooth |
| Moisture | Seal edges | Good | Waterproof |
| Cost | Low | Medium | Higher |
Thickness to choose
For applied frames, 8 to 12 mm thick MDF is enough and light enough to glue. Shaker boards are usually 9 to 12 mm thick and 70 to 95 mm wide.
FREE WALL CALCULATOR
Plan your wall in 60 seconds
Enter your wall size. Get frame sizes, spacing, total molding length and your kit price. Save $20 on orders over $350 with code WALL20.
Calculate my wall Get a free design drawingShop MDF Paneling Kits
View all
Arched Accent Wall Trim Molding Kit, 3 WidthsFrom $70.08Choose options
Shaker Square Grid Wall Paneling Kit$324.00Choose options
Arch Molding Kit, 3 WidthsFrom $70.08Choose options
Decorative Wall Panels, Shaker Square Grid Kit$324.00Choose options
MDF Wall Panels, Shaker Paneling Kit 75 mm Boards$368.40Choose options
Modern Arched Wall Panel Kit: Pre-Cut MDF Wall Molding$168.00Choose options
Bespoke Ready to Assemble Wall Paneling Package, Factory Prim...$534.00Choose options
Geometric Chevron Accent Wall Molding Kit, Pre-Cut$279.29Choose options
Board and Batten Half Wall Paneling Kit with Chair RailFrom $37.70Choose options
Rounded Corner Picture Frame Wall Molding SetFrom $191.84Choose options
French Step Corner Picture Frame Wall Molding KitFrom $246.67Choose options
Square Grid Board and Batten Accent Wall KitFrom $302.89Choose optionsExample layouts with real measurements
8 ft wall, 8 ft ceiling
On an 8 ft wall use a 4 × 3 shaker grid of MDF boards: panels 1' 8" (51 cm) wide by 2' 2.5" (67 cm) tall, framed with 3" boards. Total about 72 linear ft with waste.
Common questions
Is MDF good for wall panelling?
Yes, for dry interior rooms it is the best value: it stays straight, has no knots and paints smoothly. Prime every cut edge before painting so the edges do not soak up paint.
Can MDF moulding go in a bathroom?
Only if it is fully sealed on all faces and edges and the room is well ventilated. Near showers or tubs choose PVC or a waterproof kit instead.
How do you attach MDF moulding to a wall?
Construction adhesive plus 18 gauge brad nails into the drywall or studs. Light profiles up to 10 mm can be fixed with high-tack adhesive alone on smooth painted walls.
Get it pre-cut
Every Trim Wall Haus kit ships pre-cut, numbered, factory primed and ready to paint.
- Modern Arched Wall Panel Kit, from $140
- Shaker Square Grid Wall Paneling Kit, from $270
- Geometric Chevron Accent Wall Molding Kit, from $233
Shop all MDF panelling kits · Plan your wall free
Measured layouts: 10 ft shaker wall · 12 ft shaker wall · all sizes
Kits for this project
Every kit ships pre-cut, primed and numbered. $10 off orders over $100 with code BLOG10.

Picture Frame Wall Molding Kit, 2 Upper & 2 Bottom Frames | Easy Installation
From $75

Wall Trim Molding Kit, 3 Upper, 3 Middle & 3 Bottom Frames | Pre-Cut Ready to Assemble
From $90

Picture Frame Ready to Assemble Wall Molding Kit, 3 Upper & 3 Bottom Frames | Easy Installation
From $181
More styles: Trim Wall Molding Kits Free wall molding calculator All wall molding guides
Ready to transform your wall?
Pre-cut, factory primed kits. Free shipping. $20 off orders over $350 with code WALL20.
Calculate my wall Shop MDF Paneling Kits