Arched Wall Molding Layout for a 13 ft Wall: Arch Sizes

Compare broad and narrow arch options on this 13 ft wall with a 8 ft ceiling. Width, radius and straight legs are calculated together so the curve can be checked against a real supplied product.

4 arches, 31.5 in / 800.1 mm centerline width and 15.75 in / 400.05 mm centerline radius. Straight-leg centerline length: 62.25 in / 1581.15 mm.
Arched Wall Molding Layout for a 13 ft Wall Calculated example in inches. Shaded areas reserve furniture or openings. See the component table for measurements.156 in / 396.24 cm wide96 in / 243.84 cm high
Calculated planning drawing, not a customer-project photograph or a promise that a standard kit has these dimensions. Replace all assumed dimensions with your measured wall.

Compare the design options

Arch-count comparison for this exact wall
Arches Centerline width Radius Straight leg Net trim 10% allowance
3 44 in / 1117.6 mm 22 in / 558.8 mm 56 in / 1422.4 mm 45.279 linear ft / 13.801 m 50 linear ft / 15.24 m
4 31.5 in / 800.1 mm 15.75 in / 400.05 mm 62.25 in / 1581.15 mm 57.993 linear ft / 17.676 m 64 linear ft / 19.507 m
5 24 in / 609.6 mm 12 in / 304.8 mm 66 in / 1676.4 mm 70.708 linear ft / 21.552 m 78 linear ft / 23.774 m

Worked placement scenario

For the illustrated 4 arches, each curve rises 15.75 in / 400.05 mm above its spring line. The spring line is 72.25 in / 1835.15 mm above the finished floor. Compare that line with wall lights and the headboard before selecting the curve; moving the spring line changes the straight legs, while changing width also changes radius and curved length.

Arch locations from the finished left corner and floor
Arch Left centerline Right centerline Spring line above floor Leg end above floor
1 6 in / 152.4 mm 37.5 in / 952.5 mm 72.25 in / 1835.15 mm 10 in / 254 mm
2 43.5 in / 1104.9 mm 75 in / 1905 mm 72.25 in / 1835.15 mm 10 in / 254 mm
3 81 in / 2057.4 mm 112.5 in / 2857.5 mm 72.25 in / 1835.15 mm 10 in / 254 mm
4 118.5 in / 3009.9 mm 150 in / 3810 mm 72.25 in / 1835.15 mm 10 in / 254 mm

Cut schedule and material allowance

Components for the illustrated option
Component Quantity Length each / run Measurement basis
Straight arch legs 8 62.25 in / 1581.15 mm Centerline length; supplied joint geometry to confirm
Semicircular tops 4 49.48 in / 1256.794 mm Centerline arc length; not straight stock to bend

The listed components total 57.993 linear ft / 17.676 m. A 10% cutting allowance, rounded up to a whole foot, gives 64 linear ft / 19.507 m. This includes only the listed components; baseboards, adhesive, paint and unlisted return pieces are separate. Continuous rails are total runs, not a promise of one supplied piece.

Product images and kit choices

These images come from the linked Trim Wall Haus product listings. They show the product style; the pictured configuration is not automatically the cut schedule on this page.

Modern Arched Wall Panel Kit: Pre-Cut MDF Wall MoldingModern Arched Wall Panel Kit: Pre-Cut MDF Wall Molding
Image from the linked product listing. Compare its configuration with the drawing.
Flexible Arch Trim Wall Molding Kit | Pre-Cut MDF Decorative Wall PanelsFlexible Arch Trim Wall Molding Kit | Pre-Cut MDF Decorative Wall Panels
Image from the linked product listing. Compare its configuration with the drawing.
U Shaped Arch Wall Trim Molding Kit | Pre-Cut MDF Medium & LargeU Shaped Arch Wall Trim Molding Kit | Pre-Cut MDF Medium & Large
Image from the linked product listing. Compare its configuration with the drawing.

Questions for this specific plan

What radius does a 13 ft wall need with 4 arches?

This semicircular example uses 15.75 in / 400.05 mm centerline radius. The supplied molded curve must match the intended shape; a wall width does not by itself dictate a product radius.

Can I make the curved pieces by cutting straight molding?

The 49.48 in / 1256.794 mm listed for each semicircular top is a geometric centerline length. It is not a bending or fabrication instruction. Confirm a suitable supplied curve and the joint details.

What if a wall light falls on the curve?

Mark its complete mounting plate against the spring line at 72.25 in / 1835.15 mm. Compare another arch count or change the position before ordering; do not trim an electrical fitting or hide a service cover.

What should I send for an adjusted drawing?

Send actual wall width, ceiling height, baseboard height and every fixed obstacle from one consistent floor and corner origin. This example has a 156 in / 3962.4 mm wall width and 96 in / 2438.4 mm ceiling; changing either requires a revised plan.

Continue with your wall measurements

Plan my wallCompare matching kitsSend a drawing for review

Usable openings and trim-face coverage

Additional measurements calculated from this exact drawing
Calculated measurement Result
Wall area above assumed baseboard 98.042 sq ft
Estimated area covered by trim faces 6.041 sq ft
Wall area outside trim faces 92.001 sq ft
Trim-face share of wall above baseboard 6.162%
Largest framed/grid rectangular opening 30.25 in / 768.35 mm × 61.625 in / 1565.275 mm
Area of that rectangular opening 12.946 sq ft
Artwork test with a 2-inch visual margin on all sides 26.25 in / 666.75 mm × 57.625 in / 1463.675 mm

Face coverage is the union of the drawn trim strips, excluding the existing 5.5-inch baseboard. Curved profiles use a centerline-length × face-width estimate. Wall area outside trim still includes areas behind reserved furniture; it is not a visible-paint estimate. The artwork test is a visual comparison, not a mounting clearance. For an arch, the rectangular opening is measured below the spring line.

Cut-stock fit with two assumed lengths

Illustrative packing with a 1/8-inch gap between cuts; confirm actual supplied lengths
Profile group Assumed stock length Stock pieces in this packing Unallocated stock / limitation Interpretation
Straight frame / board profile 96 in / 2438.4 mm 8 270 in / 6858 mm Includes kerf and unusable remainder
Straight frame / board profile 120 in / 3048 mm 8 462 in / 11734.8 mm Includes kerf and unusable remainder

This is a first-fit decreasing packing example, not a claim of the minimum purchase quantity. Profile groups are packed separately; do not combine different actual products merely because they have the same nominal width. End trimming, damaged ends, join positions and fabrication details are not modeled. Stock lengths here are test inputs, not a statement of what the linked kits supply. Curved components are excluded from straight-stock packing.

Related layouts and planning constraints

Popular pre-cut kits: Flexible Arched Wall Molding · Oval Decorative Wall Molding Kit

Free Chrome extension: plan picture frame molding, wainscoting and board and batten walls in your browser side panel, with a cut list, live kit price and PDF. Add Wall Molding Calculator to Chrome

Ready to transform your wall?

Pre-cut, factory primed kits. Free shipping. $20 off orders over $350 with code WALL20.

Calculate my wall Shop Arched Wall Molding Kits