Arched Wall Molding Layout: 11 ft Wall, 10 ft Ceiling
Compare broad and narrow arch options on this 11 ft wall with a 10 ft ceiling. Width, radius and straight legs are calculated together so the curve can be checked against a real supplied product.
Compare the design options
| Arches | Centerline width | Radius | Straight leg | Net trim | 10% allowance |
|---|---|---|---|---|---|
| 3 | 36 in / 914.4 mm | 18 in / 457.2 mm | 84 in / 2133.6 mm | 56.137 linear ft / 17.111 m | 62 linear ft / 18.898 m |
| 4 | 25.5 in / 647.7 mm | 12.75 in / 323.85 mm | 89.25 in / 2266.95 mm | 72.852 linear ft / 22.205 m | 81 linear ft / 24.689 m |
| 5 | 19.2 in / 487.68 mm | 9.6 in / 243.84 mm | 92.4 in / 2346.96 mm | 89.566 linear ft / 27.3 m | 99 linear ft / 30.175 m |
Worked placement scenario
For the illustrated 4 arches, each curve rises 12.75 in / 323.85 mm above its spring line. The spring line is 99.25 in / 2520.95 mm above the finished floor. Compare that line with wall lights and the headboard before selecting the curve; moving the spring line changes the straight legs, while changing width also changes radius and curved length.
| Arch | Left centerline | Right centerline | Spring line above floor | Leg end above floor |
|---|---|---|---|---|
| 1 | 6 in / 152.4 mm | 31.5 in / 800.1 mm | 99.25 in / 2520.95 mm | 10 in / 254 mm |
| 2 | 37.5 in / 952.5 mm | 63 in / 1600.2 mm | 99.25 in / 2520.95 mm | 10 in / 254 mm |
| 3 | 69 in / 1752.6 mm | 94.5 in / 2400.3 mm | 99.25 in / 2520.95 mm | 10 in / 254 mm |
| 4 | 100.5 in / 2552.7 mm | 126 in / 3200.4 mm | 99.25 in / 2520.95 mm | 10 in / 254 mm |
Cut schedule and material allowance
| Component | Quantity | Length each / run | Measurement basis |
|---|---|---|---|
| Straight arch legs | 8 | 89.25 in / 2266.95 mm | Centerline length; supplied joint geometry to confirm |
| Semicircular tops | 4 | 40.055 in / 1017.405 mm | Centerline arc length; not straight stock to bend |
The listed components total 72.852 linear ft / 22.205 m. A 10% cutting allowance, rounded up to a whole foot, gives 81 linear ft / 24.689 m. This includes only the listed components; baseboards, adhesive, paint and unlisted return pieces are separate. Continuous rails are total runs, not a promise of one supplied piece.
Product images and kit choices
These images come from the linked Trim Wall Haus product listings. They show the product style; the pictured configuration is not automatically the cut schedule on this page.
Modern Arched Wall Panel Kit: Pre-Cut MDF Wall Molding
Flexible Arch Trim Wall Molding Kit | Pre-Cut MDF Decorative Wall Panels
U Shaped Arch Wall Trim Molding Kit | Pre-Cut MDF Medium & LargeFREE WALL CALCULATOR
Plan your wall in 60 seconds
Enter your wall size. Get frame sizes, spacing, total molding length and your kit price. Save $20 on orders over $350 with code WALL20.
Calculate my wall Get a free design drawingShop Arched Wall Molding Kits
View all
Arched Accent Wall Trim Molding Kit, 3 WidthsFrom $70.08Choose options
Arch Molding Kit, 3 WidthsFrom $70.08Choose options
Modern Arched Wall Panel Kit: Pre-Cut MDF Wall Molding$168.00Choose options
Oval Feature Accent Wall Molding PanelsFrom $103.68Choose options
Oval Decorative Wall Molding Kit, Small to LargeFrom $95.76Choose options
Half Wall Arched Wainscoting Panels KitFrom $88.32Choose options
Arched Decorative Wall Molding Panels, 1 to 5 ArchesFrom $175.68Choose options
U Shaped Arch Wall Trim Molding KitFrom $97.68Choose options
Flexible Arch Trim Wall Molding KitFrom $100.08Choose options
Double Arched Wall Molding SetFrom $160.32Choose optionsQuestions for this specific plan
What radius does a 11 ft wall need with 4 arches?
This semicircular example uses 12.75 in / 323.85 mm centerline radius. The supplied molded curve must match the intended shape; a wall width does not by itself dictate a product radius.
Can I make the curved pieces by cutting straight molding?
The 40.055 in / 1017.405 mm listed for each semicircular top is a geometric centerline length. It is not a bending or fabrication instruction. Confirm a suitable supplied curve and the joint details.
What if a wall light falls on the curve?
Mark its complete mounting plate against the spring line at 99.25 in / 2520.95 mm. Compare another arch count or change the position before ordering; do not trim an electrical fitting or hide a service cover.
What should I send for an adjusted drawing?
Send actual wall width, ceiling height, baseboard height and every fixed obstacle from one consistent floor and corner origin. This example has a 132 in / 3352.8 mm wall width and 120 in / 3048 mm ceiling; changing either requires a revised plan.
Continue with your wall measurements
Usable openings and trim-face coverage
| Calculated measurement | Result |
|---|---|
| Wall area above assumed baseboard | 104.958 sq ft |
| Estimated area covered by trim faces | 7.589 sq ft |
| Wall area outside trim faces | 97.37 sq ft |
| Trim-face share of wall above baseboard | 7.23% |
| Largest framed/grid rectangular opening | 24.25 in / 615.95 mm × 88.625 in / 2251.075 mm |
| Area of that rectangular opening | 14.925 sq ft |
| Artwork test with a 2-inch visual margin on all sides | 20.25 in / 514.35 mm × 84.625 in / 2149.475 mm |
Face coverage is the union of the drawn trim strips, excluding the existing 5.5-inch baseboard. Curved profiles use a centerline-length × face-width estimate. Wall area outside trim still includes areas behind reserved furniture; it is not a visible-paint estimate. The artwork test is a visual comparison, not a mounting clearance. For an arch, the rectangular opening is measured below the spring line.
Cut-stock fit with two assumed lengths
| Profile group | Assumed stock length | Stock pieces in this packing | Unallocated stock / limitation | Interpretation |
|---|---|---|---|---|
| Straight frame / board profile | 96 in / 2438.4 mm | 8 | 54 in / 1371.6 mm | Includes kerf and unusable remainder |
| Straight frame / board profile | 120 in / 3048 mm | 8 | 246 in / 6248.4 mm | Includes kerf and unusable remainder |
This is a first-fit decreasing packing example, not a claim of the minimum purchase quantity. Profile groups are packed separately; do not combine different actual products merely because they have the same nominal width. End trimming, damaged ends, join positions and fabrication details are not modeled. Stock lengths here are test inputs, not a statement of what the linked kits supply. Curved components are excluded from straight-stock packing.
Related layouts and planning constraints
Popular pre-cut kits: Flexible Arch Trim Wall Molding Kit · Arch Molding Kit
Ready to transform your wall?
Pre-cut, factory primed kits. Free shipping. $20 off orders over $350 with code WALL20.
Calculate my wall Shop Arched Wall Molding Kits